ascii prompt

.config/zsh/.p10k.zsh

@@ -1,7 +1,7 @@
-# Generated by Powerlevel10k configuration wizard on 2023-05-22 at 17:52 EDT.
+# Generated by Powerlevel10k configuration wizard on 2023-05-28 at 11:08 BST.
 # Based on romkatv/powerlevel10k/config/p10k-rainbow.zsh, checksum 16959.
-# Wizard options: compatible, rainbow, unicode, blurred heads, flat tails, 2 lines,
+# Wizard options: ascii, rainbow, 2 lines, disconnected, sparse, concise,
-# solid, right frame, dark-ornaments, sparse, concise, instant_prompt=verbose.
+# instant_prompt=verbose.
 # Type `p10k configure` to generate another config.
 #
 # Config for Powerlevel10k with powerline prompt style with colorful background.
@@ -115,7 +115,7 @@
   )
 
   # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
-  typeset -g POWERLEVEL9K_MODE=compatible
+  typeset -g POWERLEVEL9K_MODE=ascii
   # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
   # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
   typeset -g POWERLEVEL9K_ICON_PADDING=none
@@ -142,21 +142,21 @@
   typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
   typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
   # Connect right prompt lines with these symbols.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX='%240F─╮'
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
-  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX='%240F─┤'
+  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
-  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX='%240F─╯'
+  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=
 
   # Filler between left and right prompt on the first prompt line. You can set it to ' ', '·' or
-  # '─'. The last two make it easier to see the alignment between left and right prompt and to
+  # '-'. The last two make it easier to see the alignment between left and right prompt and to
   # separate prompt from command output. You might want to set POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
   # for more compact prompt if using this option.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='─'
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
   typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_BACKGROUND=
   typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_GAP_BACKGROUND=
   if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
     # The color of the filler. You'll probably want to match the color of POWERLEVEL9K_MULTILINE
     # ornaments defined above.
-    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=240
+    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=242
     # Start filler from the edge of the screen if there are no left segments on the first line.
     typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
     # End filler on the edge of the screen if there are no right segments on the first line.
@@ -164,17 +164,17 @@
   fi
 
   # Separator between same-color segments on the left.
-  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='\u2502'
+  typeset -g POWERLEVEL9K_LEFT_SUBSEGMENT_SEPARATOR='|'
   # Separator between same-color segments on the right.
-  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='\u2502'
+  typeset -g POWERLEVEL9K_RIGHT_SUBSEGMENT_SEPARATOR='|'
   # Separator between different-color segments on the left.
   typeset -g POWERLEVEL9K_LEFT_SEGMENT_SEPARATOR=''
   # Separator between different-color segments on the right.
   typeset -g POWERLEVEL9K_RIGHT_SEGMENT_SEPARATOR=''
   # The right end of left prompt.
-  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL='▓▒░'
+  typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
   # The left end of right prompt.
-  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='░▒▓'
+  typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
   # The left end of left prompt.
   typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=''
   # The right end of right prompt.
@@ -197,13 +197,13 @@
   # Red prompt symbol if the last command failed.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=196
   # Default prompt symbol.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='❯'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
   # Prompt symbol in command vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='❮'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
   # Prompt symbol in visual vi mode.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
   # Prompt symbol in overwrite vi mode.
-  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='▶'
+  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='^'
   typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
   # No line terminator if prompt_char is the last segment.
   typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=
@@ -292,7 +292,7 @@
 
   # The default icon shown next to non-writable and non-existent directories when
   # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
-  typeset -g POWERLEVEL9K_LOCK_ICON='∅'
+  # typeset -g POWERLEVEL9K_LOCK_ICON='⭐'
 
   # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons and colors for different
   # directories. It must be an array with 3 * N elements. Each triplet consists of:
@@ -368,7 +368,7 @@
 
   # Formatter for Git status.
   #
-  # Example output: master wip ⇣42⇡42 *42 merge ~42 +42 !42 ?42.
+  # Example output: master wip <42>42 *42 merge ~42 +42 !42 ?42.
   #
   # You can edit the function to customize how Git status looks.
   #
@@ -396,9 +396,9 @@
     if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
       local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
       # If local branch name is at most 32 characters long, show it in full.
-      # Otherwise show the first 12 … the last 12.
+      # Otherwise show the first 12 .. the last 12.
       # Tip: To always show local branch name in full without truncation, delete the next line.
-      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
+      (( $#branch > 32 )) && branch[13,-13]=".."  # <-- this line
       res+="${clean}${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
     fi
 
@@ -409,9 +409,9 @@
         ]]; then
       local tag=${(V)VCS_STATUS_TAG}
       # If tag name is at most 32 characters long, show it in full.
-      # Otherwise show the first 12 … the last 12.
+      # Otherwise show the first 12 .. the last 12.
       # Tip: To always show tag name in full without truncation, delete the next line.
-      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
+      (( $#tag > 32 )) && tag[13,-13]=".."  # <-- this line
       res+="${meta}#${clean}${tag//\%/%%}"
     fi
 
@@ -430,16 +430,16 @@
       res+=" ${modified}wip"
     fi
 
-    # ⇣42 if behind the remote.
+    # <42 if behind the remote.
-    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}⇣${VCS_STATUS_COMMITS_BEHIND}"
+    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}<${VCS_STATUS_COMMITS_BEHIND}"
-    # ⇡42 if ahead of the remote; no leading space if also behind the remote: ⇣42⇡42.
+    # >42 if ahead of the remote; no leading space if also behind the remote: <42>42.
     (( VCS_STATUS_COMMITS_AHEAD && !VCS_STATUS_COMMITS_BEHIND )) && res+=" "
-    (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
+    (( VCS_STATUS_COMMITS_AHEAD  )) && res+="${clean}>${VCS_STATUS_COMMITS_AHEAD}"
-    # ⇠42 if behind the push remote.
+    # <-42 if behind the push remote.
-    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}⇠${VCS_STATUS_PUSH_COMMITS_BEHIND}"
+    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" ${clean}<-${VCS_STATUS_PUSH_COMMITS_BEHIND}"
     (( VCS_STATUS_PUSH_COMMITS_AHEAD && !VCS_STATUS_PUSH_COMMITS_BEHIND )) && res+=" "
-    # ⇢42 if ahead of the push remote; no leading space if also behind: ⇠42⇢42.
+    # ->42 if ahead of the push remote; no leading space if also behind: <-42->42.
-    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}⇢${VCS_STATUS_PUSH_COMMITS_AHEAD}"
+    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && res+="${clean}->${VCS_STATUS_PUSH_COMMITS_AHEAD}"
     # *42 if have stashes.
     (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
     # 'merge' if the repo is in an unusual state.
@@ -454,12 +454,12 @@
     # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
     # Remove the next line if you don't want to see untracked files at all.
     (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"
-    # "─" if the number of unstaged files is unknown. This can happen due to
+    # "-" if the number of unstaged files is unknown. This can happen due to
     # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
     # than the number of files in the Git index, or due to bash.showDirtyState being set to false
     # in the repository config. The number of staged and untracked files may also be unknown
     # in this case.
-    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}─"
+    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && res+=" ${modified}-"
 
     typeset -g my_git_format=$res
   }
@@ -504,21 +504,21 @@
   # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
   # it will signify success by turning green.
   typeset -g POWERLEVEL9K_STATUS_OK=false
-  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='ok'
   typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
   typeset -g POWERLEVEL9K_STATUS_OK_BACKGROUND=0
 
   # Status when some part of a pipe command fails but the overall exit status is zero. It may look
   # like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
-  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='✔'
+  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='ok'
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
   typeset -g POWERLEVEL9K_STATUS_OK_PIPE_BACKGROUND=0
 
   # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
   # it will signify error by turning red.
   typeset -g POWERLEVEL9K_STATUS_ERROR=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='х'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='err'
   typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=3
   typeset -g POWERLEVEL9K_STATUS_ERROR_BACKGROUND=1
 
@@ -526,14 +526,14 @@
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
   # Use terse signal names: "INT" instead of "SIGINT(2)".
   typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
-  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='х'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION=
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=3
   typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_BACKGROUND=1
 
   # Status when some part of a pipe command fails and the overall exit status is also non-zero.
   # It may look like this: 1|0.
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
-  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='х'
+  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='err'
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=3
   typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_BACKGROUND=1
 
@@ -559,7 +559,7 @@
   # Don't show the number of background jobs.
   typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
   # Custom icon.
-  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='≡'
+  # typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   #######################[ direnv: direnv status (https://direnv.net/) ]########################
   # Direnv color.
@@ -734,14 +734,14 @@
   typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_CONTENT_EXPANSION=
   typeset -g POWERLEVEL9K_NORDVPN_{DISCONNECTED,CONNECTING,DISCONNECTING}_VISUAL_IDENTIFIER_EXPANSION=
   # Custom icon.
-  typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='nord'
+  # typeset -g POWERLEVEL9K_NORDVPN_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   #################[ ranger: ranger shell (https://github.com/ranger/ranger) ]##################
   # Ranger shell color.
   typeset -g POWERLEVEL9K_RANGER_FOREGROUND=3
   typeset -g POWERLEVEL9K_RANGER_BACKGROUND=0
   # Custom icon.
-  typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='▲'
+  # typeset -g POWERLEVEL9K_RANGER_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ######################[ nnn: nnn shell (https://github.com/jarun/nnn) ]#######################
   # Nnn shell color.
@@ -883,11 +883,11 @@
   typeset -g POWERLEVEL9K_TIMEWARRIOR_FOREGROUND=255
   typeset -g POWERLEVEL9K_TIMEWARRIOR_BACKGROUND=8
 
-  # If the tracked task is longer than 24 characters, truncate and append "…".
+  # If the tracked task is longer than 24 characters, truncate and append "..".
   # Tip: To always display tasks without truncation, delete the following parameter.
   # Tip: To hide task names and display just the icon when time tracking is enabled, set the
   # value of the following parameter to "".
-  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+…}'
+  typeset -g POWERLEVEL9K_TIMEWARRIOR_CONTENT_EXPANSION='${P9K_CONTENT:0:24}${${P9K_CONTENT:24}:+..}'
 
   # Custom icon.
   # typeset -g POWERLEVEL9K_TIMEWARRIOR_VISUAL_IDENTIFIER_EXPANSION='⭐'
@@ -945,7 +945,7 @@
 
   # Don't show context unless running with privileges or in SSH.
   # Tip: Remove the next line to always show context.
-  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
+  #typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=
 
   # Custom icon.
   # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
@@ -1367,7 +1367,7 @@
       '*'       DEFAULT)
   typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_FOREGROUND=7
   typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_BACKGROUND=5
-  typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='○'
+  # typeset -g POWERLEVEL9K_KUBECONTEXT_DEFAULT_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   # Use POWERLEVEL9K_KUBECONTEXT_CONTENT_EXPANSION to specify the content displayed by kubecontext
   # segment. Parameter expansions are very flexible and fast, too. See reference:
@@ -1465,7 +1465,7 @@
   typeset -g POWERLEVEL9K_AWS_EB_ENV_FOREGROUND=2
   typeset -g POWERLEVEL9K_AWS_EB_ENV_BACKGROUND=0
   # Custom icon.
-  typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='eb'
+  # typeset -g POWERLEVEL9K_AWS_EB_ENV_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ##########[ azure: azure account name (https://docs.microsoft.com/en-us/cli/azure) ]##########
   # Show azure only when the command you are typing invokes one of these tools.
@@ -1475,7 +1475,7 @@
   typeset -g POWERLEVEL9K_AZURE_FOREGROUND=7
   typeset -g POWERLEVEL9K_AZURE_BACKGROUND=4
   # Custom icon.
-  typeset -g POWERLEVEL9K_AZURE_VISUAL_IDENTIFIER_EXPANSION='az'
+  # typeset -g POWERLEVEL9K_AZURE_VISUAL_IDENTIFIER_EXPANSION='⭐'
 
   ##########[ gcloud: google cloud account and project (https://cloud.google.com/) ]###########
   # Show gcloud only when the command you are typing invokes one of these tools.
@@ -1625,7 +1625,7 @@
   #   P9K_IP_TX_BYTES_DELTA | number of bytes sent since last prompt
   #   P9K_IP_RX_RATE        | receive rate (since last prompt)
   #   P9K_IP_TX_RATE        | send rate (since last prompt)
-  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='${P9K_IP_RX_RATE:+⇣$P9K_IP_RX_RATE }${P9K_IP_TX_RATE:+⇡$P9K_IP_TX_RATE }$P9K_IP_IP'
+  typeset -g POWERLEVEL9K_IP_CONTENT_EXPANSION='${P9K_IP_RX_RATE:+<$P9K_IP_RX_RATE }${P9K_IP_TX_RATE:+>$P9K_IP_TX_RATE }$P9K_IP_IP'
   # Show information for the first network interface whose name matches this regular expression.
   # Run `ifconfig` or `ip -4 a show` to see the names of all network interfaces.
   typeset -g POWERLEVEL9K_IP_INTERFACE='[ew].*'
@@ -1648,7 +1648,7 @@
   # Show battery in yellow when it's discharging.
   typeset -g POWERLEVEL9K_BATTERY_DISCONNECTED_FOREGROUND=3
   # Battery pictograms going from low to high level of charge.
-  typeset -g POWERLEVEL9K_BATTERY_STAGES=('%K{232}▁' '%K{232}▂' '%K{232}▃' '%K{232}▄' '%K{232}▅' '%K{232}▆' '%K{232}▇' '%K{232}█')
+  typeset -g POWERLEVEL9K_BATTERY_STAGES=('battery')
   # Don't show the remaining time to charge/discharge.
   typeset -g POWERLEVEL9K_BATTERY_VERBOSE=false
   typeset -g POWERLEVEL9K_BATTERY_BACKGROUND=0
@@ -1702,7 +1702,7 @@
   #
   # Type `p10k help segment` for documentation and a more sophisticated example.
   function prompt_example() {
-    p10k segment -b 1 -f 3 -i '⭐' -t 'hello, %n'
+    p10k segment -b 1 -f 3 -i '*' -t 'hello, %n'
   }
 
   # User-defined prompt segments may optionally provide an instant_prompt_* function. Its job